1. Position the rear bumper under the bed, lining up the holes in the bumper mounting bracket with the square holes of the frame of the bed. Be sure that the rear bumper brackets are positioned on the front side of the frame of the bed.
2. Use the 6 supplied carriage bolts, washers, and nyloc nuts to fasten the bumper to the bed frame. (See Figure #1)
3. Check all areas around the bumper for proper clearance and alignment. Adjust as necessary.
Hook me up! Get 10% off your next exhaust or equipment order.
Sign up for the HMF Community and receive the following perks: