For Models: YXZ 1000R (2016-2024), YXZ 1000R SE (2016-2018), YXZ 1000R SS SE (2017-2018), YXZ 1000R SS (2017-2018)
1. Remove the original front bumper by removing the 4 bolts holding it to the front of the vehicle. Do not discard the 4 bolts, they will be used to install the new HMF iQ bumper. (See Figure #1)
1. Install the HMF iQ front bumper to the stock location. Loosely reinstall the 4 bolts to secure the bumper to the front of the vehicle.(See Figure #2)
NOTE: Defender HD front bumper pictured, Defender LT mouting is the same.
2. Check for proper alignment and clearance, adjust as necessary then tighten all 4 mounting bolts. (See Figure #3)
Hook me up! Get 10% off your next exhaust or equipment order.
Sign up for the HMF Community and receive the following perks: