A/C midrange jetting

Oppy · #1 01-16-2005, 09:43 PM

I put a Utility slip on my 03 500 manual. I think I read in a thread some where that the mid range jet was ok stock. I will take a plug reading as soon I ride a little. I did re set idle mix screw , and put the larger main jet in, and installed a hi flo filter. Just making sure that I dont need to adjust needle or any thing like that.

Mike/HMF · #2 01-18-2005, 10:37 AM

we never had to adjust the needle on the one we tested, but check the plug and go from there. Any questions give us a call 866-HMF-PIPE.

Oppy · #3 01-18-2005, 05:29 PM

Alright , Mike, thanks for letting me know. I thought that is what I read, But I couldnt remeber for sure, and then couldnt find it. Thanks Oppy

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode