HMF Engineering Forums  

Go Back   HMF Engineering Forums > Utility Quads > Big Bear
Register FAQ Members List Calendar Search Today's Posts Mark Forums Read

Reply
 
Thread Tools Display Modes
  #1  
Old 05-16-2007, 04:27 PM
Coop4u2c Coop4u2c is offline
Junior Member
 
Join Date: May 2007
Location: Winston Salem, NC
Posts: 3
Default '07 Big Bear r&d

the only thing you would need to change on your pipe for the '06 model is to switch the clamp onto the slip-on instead of the headpipe. other than the clamp the slip-on fits an '07 perfectly.
Reply With Quote
  #2  
Old 08-19-2007, 06:04 PM
BB400IRs BB400IRs is offline
Junior Member
 
Join Date: Mar 2007
Location: Deville LA
Posts: 2
Default

so the only thing is just swich the stock clamp onto the HMF an then it will fit perfiectly......
Reply With Quote
  #3  
Old 09-18-2007, 10:01 AM
Coop4u2c Coop4u2c is offline
Junior Member
 
Join Date: May 2007
Location: Winston Salem, NC
Posts: 3
Default

no... you will have to cut both pipes and weld the end on. it would have been so much easier if HMF would have done this!
Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off



All times are GMT -4. The time now is 04:33 AM.


Powered by vBulletin® Version 3.6.5
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.