LT Front Bumper, Arctic Cat® Wildcat XX Instructions For Models: Wildcat XX (2018-2024)
1. Remove the lower plastic fascia under the headlights and grille.
NOTE: It is recommended to use medium strength thread locking agent (typically blue) on all bolts.
1. Loosely install the provided (4) M12 mounting bolts to mount the bumper to the frame. The frame of the machine will be threaded at the mounting locations.
2. Check for clearance and alignment around the bumper. Tighten all mounting bolts.(See Figure #1)
Hook me up! Get 10% off your next exhaust or equipment order.
Sign up for the HMF Community and receive the following perks:
