- OR -

Exhaust Systems Kawasaki® Prairie 650

Print Instructions

HMF Racing Slip On Exhaust Instructions

For Models: Prairie 650 (2002-2003), Prairie 700 (2004-2006)

Removal

1. Loosen the Stock Clamp that holds the Silencer and Head Pipe together.

2. Once the Clamp has been loosened, loosen and remove the bolts where the Exhaust Pipe meets the Rear Head.

3. Loosen the Silencer Mounting Bolts.

4. Brace the back of the Silencer with one hand, and take the bolts the rest of the way out.

5. Remove the Gasket on the Front Head Pipe, you will no longer need it.

Installation

Slip On Exhaust Instructions - Figure 1

1. You will need to remove the Stock Cylinder-to-Headpipe Gasket from the Rear Head Pipe,  you will no longer need this gasket.  (It may still be on the exhaust port)

2. Install the supplied HMF Gasket onto the Head Pipe Flange, then install the Head Pipe using the Stock Nuts. (Do not tighten)

3. Slide the larger T-Bolt Clamp onto the Rear Cylinder Headpipe Outlet.

4. Slide the smaller T-Bolt Clamp onto the other exhaust pipe inlet.  

5. Attach the Silencer to the original mounting points on the frame while you guide the Rear Cylinder Headpipe into the inner HMF Exhaust Inlet Tube and the OEM Front Headpipe into the Outer Exhaust Inlet Tube.

6. Tighten in this order:  

A. Rear Cylinder-to-Headpipe Mounting Nuts.

B. Silencer-to-Frame Mounting Hardware.

C. Both T-Bolt Clamps.

Discussion

Hook me up! Get 10% off your next exhaust or equipment order.

Sign up for the HMF Community and receive the following perks:

  • 10% off your next exhaust or equipment purchase
  • Details about upcoming HMF products
  • Exclusive product giveaways

Tell us your vehicle for 10% off!

Sign Me Up!

No, thanks. I'll pay full price for my powersports needs.