For Models: Outlaw 525: IRS (2007-2011)
1. Remove the Spring at the top rear of the Silencer.
2. Loosen the Clamp at the Silencer-to-Head Pipe Joint.
3. Pull and rotate the Silencer counter-clockwise in a corkscrew motion.
4. Remove the original Gasket from the Head Pipe.
1. Slide the T-Bolt Clamp onto the Inlet of the Silencer.(See Figure #1)
2. Push and rotate the HMF Silencer clockwise in a corkscrew motion, then make the connection at the Silencer-to-Inlet Joint.
3. Align and center the Silencer and tighten all hardware.(See Figure #2)
Hook me up! Get 10% off your next exhaust or equipment order.
Sign up for the HMF Community and receive the following perks: