Grab Bar, Yamaha® Raptor 250 Instructions For Models: Raptor 250 (2008-2013)
1. Remove the (4) Stock Bolts on the stock grab bar and save as you will reuse them.(See Figure #1)
2. Line up the IQ Grab Bar in the stock location and use the (4) Stock Bolts and supplied Star Washers to install. Adjust the Grab Bar to your desired height and tighten.(See Figure #2)
Hook me up! Get 10% off your next exhaust or equipment order.
Sign up for the HMF Community and receive the following perks:
