Grab Bar Defender, Yamaha® YFZ 450 Instructions For Models: YFZ 450 (2004-2013)
1. Remove the stock grab bar by loosening the mounting hardware and plastic mounting hardware.
2. Remove the stock rubber grommets and spacers and install them on the HMF Grab Bar.(See Figure #1)
2. Using the supplied (4) m8 x 25 Hex Flange Head Bolts, install through the supplied Plastic Mounting Brackets, through the Grab Bar, and tighten into sub-frame.
3. Install the plastics back on the machine. Check the alignment of the Grab Bar and tighten all hardware.
Hook me up! Get 10% off your next exhaust or equipment order.
Sign up for the HMF Community and receive the following perks:
