For Models: Renegade 500 (2008-2015), Renegade 1000 (2012-2022), Renegade 800 (2007-2014), Renegade 850 (2016-2022), Renegade 570 (2016-2022)
1. Remove the original front bumper.
2. Remove the front skid plate bolts and large washers.
3. Position the HMF front bumper on the vehicle (Lower bumper mount goes between frame and skid plate) and install the supplied bolts, washers, and nyloc nuts at the top bumper mounts. DO NOT TIGHTEN.(See Figure #1)
Renegade (12-22) Models
Older models will mount the front grill and fairing bracket using to the spacer welded to top plate of bumper. (See Figure #2)
Renegade (23->) Models
Newer models will use the supplied spacers, buttonhead bolts, washers, and nuts to bolt through the holes located on the top mounting plate of bumper. (See Figure #3)
NOTE: Top Bumper Mount will attach to the frame with the supplied hardware.